This is an old revision of the document!
NETGEAR ReadyNAS Duo V2
Connect with old browser and install this package.
This will enable SMBv2 protocol on ReadyNAS Duo v2.
You may start WSDD2 from /etc/init.d/readynas_startup for netbrowsing with SMBv2
Samba plugin on github
Add to /etc/init.d/readynas_startup near start
echo 0 > /proc/sys/net/ipv4/tcp_sack echo 0 > /proc/sys/net/ipv4/tcp_dsack echo 0 > /proc/sys/net/ipv4/tcp_timestamps
* MiniDLNA don't like this!
8TB is tested by me. PMR no restrictions, SMR - JBOD only.
You can set RSync (Backup) in JBOD anyway → this can be better solution than RAID1
/etc/init.d/readynas_startup
ifconfig eth0 mtu 1600
Don't use more, kernel driver cannot work properly with HW acceleration enabled. ReadyNAS DuoV2 can do 97MB/s (776Mbit/s) reads from Samba
/etc/frontview/samba/addons/addons.conf
[global] log level = 1
(much faster than ext4 - you can fill up to 100% disk space)
-i bytes per inode (4096-65536)
mkfs.ext3 -b 4096 -i 16384 /dev/d/d tune2fs -i0 -c -1 -o user_xattr,acl /dev/d/d tune2fs -o journal_data_writeback
Remove root reserved space
tune2fs -m 0 /dev/d/d
Mount fstab (UPS recommended)
/dev/c/c /c ext3 defaults,acl,user_xattr,noatime,nodiratime,nobh,commit=40,data=writeback 0 2
/dev/c/c /c ext4 defaults,acl,user_xattr,noatime,nodiratime,nobh,jqfmt=vfsv0,data=writeback,oldalloc 0 2
Little tuning in /etc/init.d/readynas_startup put near start
echo deadline >/sys/block/sda/queue/scheduler echo deadline >/sys/block/sdb/queue/scheduler
Turn off quotas! Don't start cups! (is_rackmount=1)
/etc/frontview/usb/storage.conf
/etc/frontview/addons/bin/APPGENIE/cp.d/cpinst/cp_updater.sh –> put exit 0 at start
or remove it completely rm -r /etc/frontview/addons/bin/APPGENIE/
/transmission/settings.json
message-level: 1
grep -q -F 'root_container=B' /etc/minidlna.conf || echo 'root_container=B' >>/etc/minidlna.conf grep -q -F 'strict_dlna' /etc/minidlna.conf || echo 'strict_dlna=no' >>/etc/minidlna.conf sed -i '/album_art_names/d' /etc/minidlna.conf
File | Description |
---|---|
Enable Root Access | This enable SSH access to ReadyNAS |
HTop | HTop bash utility |
Enable MySQL Access | Enable access to built in MySQL 5.1.49 |
PHP 5.4.3 ARM | Install PHP 5.4.3 |
Transmission 2.92 ARM | Bittorent Client for ReadyNAS5 |